In many industries, like agriculture and mining, it’s necessary to weigh how much material is being transported in a haul truck.
Traditionally, this has been achieved using conventional truck scales. These are heavy-duty conventional scales, usually permanently mounted on concrete or in the form of portable weigh pads. After calibration, a loaded truck drives-up the weighing equipment to take the measurement. This process allows for the measurement of the flow of goods and other materials, from waste management loads bound for landfills to truckloads full of extracted minerals that must be weighed to calculate payloads.
Unfortunately, traditional truck scales are often times cumbersome, time-consuming, and expensive. The weigh scale method can cause truck drivers to lose time, decreasing throughput and supply chain efficiency.
Enter: 3D Volume Load Scanner
However, there is now a new technology that will vastly improve the accuracy and efficiency of weighing payloads: 3D volume load scanner technology. This new approach uses sophisticated scanners and software to create a three-dimensional map of the volume contained in a truck, which can then be used to calculate the payload weight. The 3D volume load scanner is far more efficient and cost-effective than conventional weighing methods.
Here’s an example of the load scanner technology from one the leading industry suppliers:
How It Volume Load Scanner Works
The 3D volume load scanner system works by using a special laser scanning device, which is located at the top of a pole, connected to a base. The truck drives under the laser detector, which scans the load inside. This data is then rendered into a 3D image showing the spatial distribution of the materials inside. The software is programmed to use this information to perform calculations that will identify the weight of the payload. It’s a much faster, easier process than the old systems, using laser scanners instead of requiring trucks to wait in line to sit on top of a scale.
The Benefits of the 3D Volume Scanner
Using a 3D load volume scanner has many advantages over truck scales. The process is quick and efficient, and minimizes the need for truck drivers to wait in long lines to get onto a truck scale system. Furthermore, 3D volume scanning provides information about how the material in a truck is distributed, allowing drivers to adjust for safer weight distribution. This helps decrease wear and tear on the vehicles, leading to long-term savings on repairs and replacements for shipping fleets. It’s also safer for the driver, since proper weight distribution decreases the chance of the truck rolling over in an accident.
Another advantage of 3D volume scanner technology is long-term data measurement and storage. The software programs that are used record the measurements of weight, volume, and distribution inside of trucks. This data is valuable to farming, mining, and shipping companies, and analysis of long-term trends can help companies plan for better optimization of their overall shipping systems. One of the best software solutions that’s suitable for most load scanner systems is the Payload Pro software suite. This platform was developed by Walz Scale, a globally recognized provider of various load scanning technologies and truck scales solutions. See the video below by Walz Scale to explore some of the new applications of the company’s Walz Scanner technology.
3D volume scanning technology is a cheaper, safer, and more efficient alternative to slow, burdensome truck scales for sale. They’re inexpensive to install, they work quickly to determine payload weight, and they provide new insights into long-term trends by recording weight and volume data. From mining to agricultural applications, this new technology will go a long way toward making supply chains more efficient across a wide variety of industries.
If you’re looking to get maximum value when selling your gold, then take some time to educate yourself about some general practices to avoid being scammed or misled by sketchy gold buyers. Below we share five tips to help you sell gold more effectively and mindfully.
1. Determine the purity and value of your gold
Before you take your take your items to a gold buyer, be sure to determine the karat purity of the gold as well as its value. For example, if the current market price of gold is $1,300.00, then 100% pure, 24 karat gold is valued at $1,300.00 an ounce.
If you determine that your gold is 20 karat, and you’re looking to sell one ounce, then multiply the purity percentage (you gold’s karat divided by 24) by the market value. In this case, we’re selling one ounce (valued at $1,300) at 83.3% purity (20/24 = 0.833), so we can expect market value to $1,083.29. Just don’t always expect to earn the market value when you sell your gold a gold buyer.
2. Weigh your gold first before taking it to a buyer
Parallel to the latter step, be sure to know exactly how much your gold weighs before taking it to a gold buyer. In most cases, precious metals are traded in “Troy ounce” measurements. One Troy ounce weighs 31.10347 grams (or 1.097142 standard ounce). One Troy ounce is just a shy less than a standard ounce. This alone is good to know before visiting a gold buyer.
3. Find local and reputable gold buyers in your area
It’s best to avoid mail-in gold buying services, as this means selling your gold gives you minimal control over your sale. Also try to avoid “one day only” and temporary gold buying events. Both of these avenues have a reputation for cheating gold sellers, so it’s best to find a local gold buyer in your area, like www.BirminghamCoin.com who serves the greater southest area of Michigan. The best gold buyers not only have an honest reputation in the local community, but many are also licensed, monitored, and registered with their local and state governments.
4. Ensure the weighing process is done in plain sight
By law, the gold buyer is required to weigh your items individually and in plain sight of you, the seller. If possible, ensure the gold buyer’s scales are inspected and certified, and at the very least, teared before each weigh. Depending on where you’re located, some gold buyers will indicate that the office of weights and measures has inspected the scales. This is sometimes indicated by a blue sticker with the current date on it.
5. Get a complete sales receipt
After you sell your gold, make sure that the buyer provides you with a complete receipt of the details regarding the sale. This is to protect your case in the instance of dispute.
The information included a complete sales receipt includes the follow:
the amount paid for the gold
the weight of gold sold to the buyer
the quality or fineness (karat) of the gold sold
the name and address of the buyer
the date of the transaction
the name, address and signature of the gold seller
Ensuring you get a complete sales receipt when selling your gold is vital in case issues rear after the transaction.
Calibration is defined as a set of procedures, performed in line with a definite formula that contrasts the measurements made by an instrument with measurement performed by a more accurate/standard instrument for the purpose of detecting and exposing errors discovered in the instrument tested.
Usually, all instruments are expected to have consistent calibration with others for the purpose of accuracy. However, for this to happen, there must be a body tasked with governing the calibration process so as to ensure that what is delivered to the public is precise and of high quality. As such, instrument calibration consultants spawned and accredited to provide accurate, timely and documented calibration designed to enhance processes, providing the foundation for quality products.
The Importance of Calibration Companies
The role of instrument calibration with various devices and instruments ensure that these tools provides measurement that are accurate and dependable for their use. There is a wide range of disciplines that rely on calibration.
These disciplines includes: thermal, mass, density, volume, pressure/vacuum, force, dimension, time, rheology, electrical devices, analytical instruments among others. All these require accuracy; instrument calibration purpose is to ensure that the readings made by an instrument are consistent with other standard instruments, and that it can be trusted for its displayed measured value.
Calibration of instruments plays a very significant role for the industry in the following ways:
It ensures that products are manufactured to stipulations.
It demonstrates that the whole industry at large operates in unison providing quality system and technically capable individuals who are able to generate technically applicable/valid results.
Instrument calibration increases the quality and value of products manufactured.
It ensures that there is traceability and that all measurements are uniform together with the products manufactured using these instruments.
Finally, instrument calibration as a science and an art as stated before plays according to stipulated rules. These rules are carefully weighed and tested before being implemented; and this is where instrument calibration consultants come in.
The Role of Instrument Calibration Consulting
The role, duty and value that instrument calibration consultants provide is indispensable for some companies. Instrument calibrators are also very specialized and hard to come by, as they are often serve entire regions or states, like Illinois calibration company OQInternational.com. This Illinois calibration company provides consulting, services, and inspections for calibrated instruments throughout the state of Illinois.
Instrument calibration consultants hold a very important role in the calibration industry. The company deals with all issues related to tools and instruments that take measurements. They have a role, and a duty in:
1. Method development – Calibration consultants work with laboratories to develop procedures intended to help concerned parties generate data that is consistent with the scope and application of the chosen procedure/method. Instrument calibration consultants establish quality control procedures that need to be executed throughout the undertaking.
2. Uncertainty analysis – It is the duty of instrument calibration consultant to ensure that the instruments released in the market are not only accurate, but can also be relied upon. They therefore monitor the validity of all the tests and calibrations of your equipments. They have a philosophy that it is only through proper calibration of instruments and equipments that quality services and projects can be streamlined.
3. Personnel Placement – Instrument Calibration Consultants also place both short term and long term onsite personnel in both small and large biotech and medical organizations. The main aim of placing personnel on site is to ensure that all procedures are in accordance to the stipulated laws.
4. Asset Management – Instrument calibration Consultants also take part in validating the assets that are to be used in laboratories for measurement purposes. They also offer certification and re-certification of calibration equipments.
Other duties performed by instrument calibration consultants include SOP development and Calibration Program Design. It is through their role that the value of what is practiced in the industry is guaranteed. Additionally, the duties guarantee uniformity and unison in the industry.
A great calibration company can help your Illinois-based business in ensuring that all your devices and measuring equipment is working properly and accurately. Trusted and professional calibration company can measure the various machines and units you have in the workplace and ensure the accuracy and adequacy for how each device performs. The goal is to ensure that you’ve got a greater and more sensible series of readouts that are easy to manage.
However, no two Illinois calibration companies are ever truly alike. You need to look for a few key indicators when finding an instrument calibration company in Illinois that you can rely on. This calibration service provider needs to work in many fields and standards while also using the best possible tools that are sensible and ready to use for the demands that you might have to go along with at any given time.
An Illinois Calibration Company With Diversified Specialties
There are many specialties that different calibration companies in Illinois can work with. These include functions relating to mechanical tests, torsion tests, linear measuring functions, pressure and vacuum measurements and more. A great calibration company will work with as many of these fields as possible.
All Calibration Standards & Devices Must Be Covered
Several different calibration standards have to be used when getting a calibration company’s services to work for your Illinois business. For instance, ANSI, ASTM, ISO, PCI and AMRL standards may be used in order to get ideas on how different measurements are to be used with care. Each standard must be measured right to ensure that there’s more than enough control on every single item that may be offered and useful for the demands you might have.
Calibration services may work with products from all brands and industries in Illinois. The key is to read information on how the pressure, temperature and other forces in a device work. In many cases the tools that are used will administer plenty of pressure and other components in order to get accurate measurements. Part of this comes from the need to review everything in a spot to where functions are kept with care and in check as well as possible.
What Calibration Tools Does the Illinois Company Use?
Great calibration services in Illinois can give you access to loads of different quality materials that make the calibration process as easy to handle as possible. For instance, the Illinois calibration service provider of www.QQInternational.com is an Illinois-based calibration company that provides an arsenal of calibration tools and capabilities. Visit the services page to learn more about the company’s capabilities in instrument calibration.
These tools often include the use of mA loop calibrators that measure currents in different devices. These can be portable and easy to use in any industrial site. Pressure calibrators are often added to different devices to administer different pressure levels in all sorts of spots to make them sensible and easy to manage. These pressure calibrators may work with vacuums that go up to 10,000 psi.
Temperature calibrators are designed to also review the ways how different measurements work. This is to see how different items are reviewed with infrared readouts to help identify the quality of the air in a spot. Some of these calibration materials may work at temperatures up to 1200 degrees Celsius.
Great calibration services can really work wonders for the right companies that depend on the working order of their equipment. You need to be fully aware of what you need to use in order to get your functions up and running right. Calibration services will really work well and protective as needed.